Lithofin Wax-Off

Description
Lithofin WAX-OFF is versatile, ready to use cleaner based on a highly acive combination of solvents and cleaning components.

Technical Data:
Density: ca.0,82 g/cm3
Ph- Value: n.a
Appearance: liquid, clear
Odour: aromatic, orange-like
Flash Point: approx. 39 degrees
Solubility in water: emulsifiable

Properties

Lithofin WAX-OFF dissolves organic dirt such as wax, oil, grease, tar, fresh paint, sealants, care products residues, etc. and allows them to be removed with water.

Field of use

For removing oily and greasy dirt deposits from solvent resistant surfaces such as natural and engineered stone, ceramics, clay and quarry tiles, concrete, etc. Suitable for indoor and outdoor use.
Also suitable for removing elastic joints (silicone).

Directions of use

Apply Lithofin WAX-OFF undiluted to the dry surface and distributed evenly. Allow the product to work for about 5 to 20 minutes, brushing occasionally. When all deposits are dissolved, add some water, brush and remove the solution from the surface. On large surfaces use a squeegee or a wet and dry vac, Always rinse well with clear water. In case of stubborn deposits, repeat this procedure when the surface has dried.

Please note: the surface temperature must not exceed 25 degrees. Switch off under floor heating; Solvent sensitive surfaces such as rubber, paint, varnish, linoleum, asphalt, some plastics, etc. must be protected against splashes.
Always try the product in an inconspicuous area prior to use.
Advise: in case of deep oil stains on natural and artificial stone, we recommend Lithofin OIL-EX
Coverage: approx. 7 to 15 m2 depending on type of stubbornness of the deposits.